Skip to content

Installing on openSUSE

This has been tested on Tumbleweed.

Install hidapi

sudo zypper install libhidapi-libusb0 python312-devel kernel-devel python311-evdev

python310-devel and kernel-devel are required because pip is going to have to build evdev.

Upgrade pip

You may need to upgrade pip, using pip.

python3 -m pip install --upgrade pip

Configure access to Elgato devices (udev rules)

The following will create a file called /etc/udev/rules.d/60-streamdeck.rules with all the necessary udev rules that provides your user with access to USB devices created by Elgato.

sudo wget https://raw.githubusercontent.com/streamdeck-linux-gui/streamdeck-linux-gui/main/udev/60-streamdeck.rules -O /etc/udev/rules.d/60-streamdeck.rules

alternatively to grabbing the file directly from the repository you can use the following command:

sh -c "echo -e 'SUBSYSTEM==\"usb\", ATTRS{idVendor}==\"0fd9\", ATTRS{idProduct}==\"0060\", TAG+=\"uaccess\"\\n'\
'SUBSYSTEM==\"usb\", ATTRS{idVendor}==\"0fd9\", ATTRS{idProduct}==\"0063\", TAG+=\"uaccess\"\\n'\
'SUBSYSTEM==\"usb\", ATTRS{idVendor}==\"0fd9\", ATTRS{idProduct}==\"006c\", TAG+=\"uaccess\"\\n'\
'SUBSYSTEM==\"usb\", ATTRS{idVendor}==\"0fd9\", ATTRS{idProduct}==\"006d\", TAG+=\"uaccess\"\\n'\
'SUBSYSTEM==\"usb\", ATTRS{idVendor}==\"0fd9\", ATTRS{idProduct}==\"0080\", TAG+=\"uaccess\"\\n'\
'SUBSYSTEM==\"usb\", ATTRS{idVendor}==\"0fd9\", ATTRS{idProduct}==\"0084\", TAG+=\"uaccess\"\\n'\
'SUBSYSTEM==\"usb\", ATTRS{idVendor}==\"0fd9\", ATTRS{idProduct}==\"008f\", TAG+=\"uaccess\"\\n'\
'KERNEL==\"uinput\", SUBSYSTEM==\"misc\", OPTIONS+=\"static_node=uinput\", TAG+=\"uaccess\", GROUP=\"input\", MODE=\"0660\"' > /etc/udev/rules.d/60-streamdeck.rules"

For the rule to take immediate effect, run the following command:

sudo udevadm trigger

If the software is having problems later to detect the Stream Deck, you can try unplugging/plugging it back in.

Install Stream Deck UI

From Pypi with pip

python3 -m pip install streamdeck-linux-gui --user

From Source

Please make sure you have followed the steps below untill the Install Stream Deck UI section before continuing.

The steps to install from source can be found here

Launch the Streamdeck UI

Launch with

streamdeck

See system tray installation.

See troubleshooting for tips if you're stuck.